The products listed below are for the theme 'Arc Flash Labels'.

 Electrical Safety Labels

Arc Flash and Shock Hazard Appropriate PPE and Tools Required When Working On This Equipment (with Graphic)
3.5"x5"
LB-2603
more info Arrow Right Image
Arc Flash and Shock Hazard Appropriate PPE Required (with 2 Symbols)
3.5"x5"
LB-2604
more info Arrow Right Image
Arc Flash And Shock Hazard, Appropriate PPE Required
1.5"x3" to 5"x10"
LB-0006
more info Arrow Right Image
Arc Flash And Shock Hazard, Follow All Requirements In NFPA 70E For Safe Work Practices And For Personal Protective Equipment
1.5"x3" to 5"x10"
LB-0004
more info Arrow Right Image
Arc Flash And Shock Hazard. Appropriate PPE Required. Follow All Safety Procedures And Wear Proper PPE In Accordance To Napa 70E. (With Graphic)
2"x3" to 10"x14"
LB-2362
more info Arrow Right Image

 Electrical Safety Signs

Arc Flash And Shock Hazard 240 Volts Or Less. Less Than 10,000 Available Short Circuit Amps. Reference: Sop Ma-0370
1.5"x3" to 5"x10"
LB-0007
more info Arrow Right Image
Arc Flash And Shock Hazard More Than 240 Volts Up To 600 Volts, Less Than 25,000 Available Short Circuit Amps, Reference: Sop Ma-0370
1.5"x3" to 5"x10"
LB-0008
more info Arrow Right Image
Electric Arc Flash Hazard, Will Cause Severe Injury Or Death, Wear Proper Protective Equipment Before Opening Or Performing Diagnostic Measurements While Energized (See NFPA 70E)
1.5"x3" to 5"x10"
LB-0005
more info Arrow Right Image
Shock and arc flash explosion hazards. Follow ALL requirements in NFPA 70E for safe work practices and for Personal Protective Equipment.
1.5"x4.5" to 2.75"x8.25"
LB-0010
more info Arrow Right Image

 Safety Labels

Do Not Look At Welding Arc
2"x3" to 10"x14"
LB-2581
more info Arrow Right Image
ISO W042 -Arc Flash Symbol
0.75"x0.84" to 6"x6.71"
LB-4238
more info Arrow Right Image
Potential Arc-Flash Hazards Exist While Working On This Energized Equipment
1.5"x3" to 5"x10"
LB-0009
more info Arrow Right Image
Shock And Arc Flash Explosion Hazards, Follow All Requirements In NFPA 70E For Safe Work Practices And For Personal Protective Equipment
1.5"x4.5" to 2.75"x8.25"
LB-0011
more info Arrow Right Image

 Safety Signs

Arc Flash and Shock Hazard Appropriate PPE Required Flash Hazard Boundary Cal/Cm2 Flash Hazard At 18 Inches PPE Level ___ Shock Hazard When Cover Is ___ Limited Approach Restricted Approach ___ Prohibited Approach ___
3.5"x5" to 10"x14"
S-0081
more info Arrow Right Image
Warning - Arc Flash Hazard Appropriate PPE Required Flash Protection.....(Bilingual)
5"x7" to 10"x14"
S-0083
more info Arrow Right Image

 Safety Signs - ANSI

Custom
Arc Flash Hazard Appropriate PPE Required. Add Nominal System Voltage, Available Fault Current
10" x 14"
LB-3590
personalize Arrow Right Image